Discussion:
Help For Vinny Who Has Struggled For Years With Drilling
(too old to reply)
jon_banquer
2014-10-24 18:10:23 UTC
Permalink
1 hour seminar done for Cimatron Drilling called Advanced Drilling Tools & Techniques, how to reduced drill programming time:



I hope this helps, Vinny. It's a shame to see you troll and fail so often. I think it's time for you to put down the beer and finally increase your substandard skill set. I'd also suggest you start attending A.A. meetings.
AlDrake
2014-10-24 21:27:15 UTC
Permalink
Post by jon_banquer
http://youtu.be/IQDRLK_TU98
I hope this helps, Vinny. It's a shame to see you troll and fail so often. I think it's time for you to put down the beer and finally increase your substandard skill set. I'd also suggest you start attending A.A. meetings.
Wahahahaha.........

--- news://freenews.netfront.net/ - complaints: ***@netfront.net ---
vinny
2014-10-28 23:34:58 UTC
Permalink
Post by jon_banquer
1 hour seminar done for Cimatron Drilling called Advanced Drilling Tools &
http://youtu.be/IQDRLK_TU98
I hope this helps, Vinny. It's a shame to see you troll and fail so often.
I think it's time for you to put down the beer and finally increase your
substandard skill set. I'd also suggest you start attending A.A. meetings.
JB...Drilling in its infancy. lol
jon_banquer
2014-10-29 00:04:18 UTC
Permalink
Post by vinny
Post by jon_banquer
1 hour seminar done for Cimatron Drilling called Advanced Drilling Tools &
http://youtu.be/IQDRLK_TU98
I hope this helps, Vinny. It's a shame to see you troll and fail so often.
I think it's time for you to put down the beer and finally increase your
substandard skill set. I'd also suggest you start attending A.A. meetings.
JB...Drilling in its infancy. lol
So are you and it often shows.

Tell this group again how drilling is so simple and how "good" Mastercam is at it. Guess who copied a good deal of Cimatron's drilling... SolidCAM. Very smart on their part. Israeli CAM programmers know drilling. You don't. By the way, NX sucks at drilling. Now keep on telling this group how drilling is so simple. Cimatron, SolidCAM, etc. seem to think it's as important as I do.

How does it feel that I make you look like an idiot over and over? When it came to the Prototrak control, Al Drake made you look like an idiot. It's really not that hard to do. Have another beer!
vinny
2014-10-29 00:21:46 UTC
Permalink
Post by vinny
Post by jon_banquer
1 hour seminar done for Cimatron Drilling called Advanced Drilling Tools &
http://youtu.be/IQDRLK_TU98
I hope this helps, Vinny. It's a shame to see you troll and fail so often.
I think it's time for you to put down the beer and finally increase your
substandard skill set. I'd also suggest you start attending A.A. meetings.
JB...Drilling in its infancy. lol
So are you and it often shows.

Tell this group again how drilling is so simple and how "good" Mastercam is
at it. Guess who copied a good deal of Cimatron's drilling... SolidCAM. Very
smart on their part. Israeli CAM programmers know drilling. You don't. By
the way, NX sucks at drilling. Now keep on telling this group how drilling
is so simple. Cimatron, SolidCAM, etc. seem to think it's as important as I
do.

How does it feel that I make you look like an idiot over and over? When it
came to the Prototrak control, Al Drake made you look like an idiot. It's
really not that hard to do. Have another beer!

*********
oh the event thing lol

The isrealis know drilling, fuck man, read your own stupid shit once in a
while.
jon_banquer
2014-10-29 01:36:18 UTC
Permalink
Post by jon_banquer
Post by vinny
Post by jon_banquer
1 hour seminar done for Cimatron Drilling called Advanced Drilling Tools &
http://youtu.be/IQDRLK_TU98
I hope this helps, Vinny. It's a shame to see you troll and fail so often.
I think it's time for you to put down the beer and finally increase your
substandard skill set. I'd also suggest you start attending A.A. meetings.
JB...Drilling in its infancy. lol
So are you and it often shows.
Tell this group again how drilling is so simple and how "good" Mastercam is
at it. Guess who copied a good deal of Cimatron's drilling... SolidCAM. Very
smart on their part. Israeli CAM programmers know drilling. You don't. By
the way, NX sucks at drilling. Now keep on telling this group how drilling
is so simple. Cimatron, SolidCAM, etc. seem to think it's as important as I
do.
How does it feel that I make you look like an idiot over and over? When it
came to the Prototrak control, Al Drake made you look like an idiot. It's
really not that hard to do. Have another beer!
*********
oh the event thing lol
The isrealis know drilling, fuck man, read your own stupid shit once in a
while.
Read my own stupid shit? WTF? I thought you said I only used cut and paste. Why are you consistently, inconsistent?

How many beers have you consumed this afternoon/tonight?
vinny
2014-10-29 10:10:12 UTC
Permalink
Post by jon_banquer
How many beers have you consumed this afternoon/tonight?
3.
How many slices of pizza have you got caught slipping in your briefcase at
the last trade show?

Did you watch an Isreali webinar on pizza aquisition?


Can we get back to picking on your lack of skills in all things machining, I
was having a good time.
Ok drilling (keeps a strait face), ever drilled with boobcam?
jon_banquer
2014-10-29 14:53:31 UTC
Permalink
Post by vinny
Post by jon_banquer
How many beers have you consumed this afternoon/tonight?
3.
How many slices of pizza have you got caught slipping in your briefcase at
the last trade show?
Did you watch an Isreali webinar on pizza aquisition?
Can we get back to picking on your lack of skills in all things machining, I
was having a good time.
Ok drilling (keeps a strait face), ever drilled with boobcam?
3 beers? I think you forgot the 1 as in 13 beers.

It's been many years since I used BobCADCAM. It could be a decent program if they tore out the CAD and replaced it. I've talked with Al Depaolo about this at length. Both BobCADCAM and SolidCAM license ModuleWorks.
vinny
2014-10-30 23:48:30 UTC
Permalink
Post by jon_banquer
Post by vinny
Post by jon_banquer
How many beers have you consumed this afternoon/tonight?
3.
How many slices of pizza have you got caught slipping in your briefcase at
the last trade show?
Did you watch an Isreali webinar on pizza aquisition?
Can we get back to picking on your lack of skills in all things machining, I
was having a good time.
Ok drilling (keeps a strait face), ever drilled with boobcam?
3 beers? I think you forgot the 1 as in 13 beers.
Actually I was just playing duke nukem forever, and actually drank 3 beers
in the game. it was the only way to defeat this pain in the ass alien.
Drink a beer and he says "puttin on the beer goggles!" then your trashed,
but...you can take a lot more punishment and your stronger, just like in
real life. lol

Loading...