Geopath mill part stop

[s***@gmail.com]

I'm using an older version of Geopath from 2003. Trying to output code for a part stop. Rapid a 3/8 pin to .1 above the part, spindle off, coolant off, rapid down .5, M0 (position the part against the stop), next tool.

Been trying to use different combinations of "Position the Tool" and "Special Purpose Commands" with no success.

Any knowledgeable Geopath users around?

[Just Me]

So Jon, as the self identified "expert"
on all things cad/cam how come
you don't have an answer for this
gentleman?

Can't find anything to cut and paste?
More likely you couldn't help him
even if you knew what he was talking
about.

I have no knowledge of Geopath so I
won't try, I'll leave you to confuse
him.

[jon_banquer]

Post by Just Me
So Jon, as the self identified "expert"
on all things cad/cam how come
you don't have an answer for this
gentleman?
Can't find anything to cut and paste?
More likely you couldn't help him
even if you knew what he was talking
about.
I have no knowledge of Geopath so I
won't try, I'll leave you to confuse
him.

I'm not self-identified you anonymous posting pussy.

My LinkedIn endorsements for my skill set and my LinkedIn connections say what you can't and never will be able to say because you're a Jew hating loser with no clues.

If you can't help the OP sit down and shut the fuck up.

[Just Me]

LinkedIn endorsements don't have
a lot of weight.
Anybody can endorse you without any
actual evidence of abilities.

You attempt to talk the talk but
offer no actual proof of being
able do any of it.

[jon_banquer]

Post by Just Me
LinkedIn endorsements don't have
a lot of weight.
Anybody can endorse you without any
actual evidence of abilities.
You attempt to talk the talk but
offer no actual proof of being
able do any of it.

What has no weight are Anonymous posting pussies like you who have never contributing anything despite years of posting here.

You're as worthless as they come. Time to stop taking up space on this planet you Jew hating piece of shit.

[Just Me]

After you asshole.

My contributions far exceed yours
as you are generally limited to
cut & paste spam on how wonderful
you and your super duper LinkedIn
group is, or how poor little old
Israel is being picked on by
people who just "don't understand"
because any questions challenging
Israel in any way is nothing but
antisemitism,so obviously can be
dismissed by the superiority of
the like of you.

Let me know when you are leaving,
we can hold hands and jump off the
cliff together.

[jon_banquer]

On Sunday, April 19, 2015 at 4:18:31 PM UTC-7, Anonymous posting pussy and Jew hater "Just Me" lied again:

<Anonymous posting pussy lies snipped>

There is a reason you're an anonymous posting pussy.

Your contributions here amount to nothing.

[Just Me]

Once again Jon I will gracefully
accept your capitulation.

Better luck next time

[jon_banquer]

On Sunday, April 19, 2015 at 4:33:19 PM UTC-7, Just Me lied:

[jon_banquer]

Post by s***@gmail.com
I'm using an older version of Geopath from 2003. Trying to output code for a part stop. Rapid a 3/8 pin to .1 above the part, spindle off, coolant off, rapid down .5, M0 (position the part against the stop), next tool.
Been trying to use different combinations of "Position the Tool" and "Special Purpose Commands" with no success.
Any knowledgeable Geopath users around?

What happens when you contact SolutionWare and ask for help?