Discussion:
The "Genius" Of Al Drake On Practically Worthless Machinist
(too old to reply)
jon_banquer
2014-10-19 01:51:10 UTC
Permalink
http://www.practicalmachinist.com/vb/cad-cam/using-construction-ball-292596/


http://www.practicalmachinist.com/vb/cad-cam/bobcad-cam-question-292665/
Al Drake
2014-10-19 08:01:13 UTC
Permalink
Post by jon_banquer
http://www.practicalmachinist.com/vb/cad-cam/using-construction-ball-292596/
http://www.practicalmachinist.com/vb/cad-cam/bobcad-cam-question-292665/
Nice to see you have been getting out. Why didn't you say hello while
you were there? Is the real world to much for you? You know you would
have to leave your lies and hate behind and that thought was a bit to
much for you, hey jon?
vinny
2014-10-19 09:35:51 UTC
Permalink
Post by jon_banquer
http://www.practicalmachinist.com/vb/cad-cam/using-construction-ball-292596/
http://www.practicalmachinist.com/vb/cad-cam/bobcad-cam-question-292665/
Nice to see you have been getting out. Why didn't you say hello while you
were there? Is the real world to much for you? You know you would have to
leave your lies and hate behind and that thought was a bit to much for
you, hey jon?
Because even soap opera johnny didnt want to get anywhere near that post.

************daily learning for allen************
G01 = a move to a destination point using feed and not turning off the
spindle or power with location checks active.

Tune in next post when we discuss G02.
vinny
2014-10-19 09:32:07 UTC
Permalink
Post by jon_banquer
http://www.practicalmachinist.com/vb/cad-cam/using-construction-ball-292596/
http://www.practicalmachinist.com/vb/cad-cam/bobcad-cam-question-292665/
here's the reply from someone on practical machinist....

"I have no idea what you are asking"


That was messsssssed up to read. I bought bobcam with my own money so my
company would buy me something to use?

Why not tell the truth, i got a cracked version of bobcam to try to push my
company into buying something lagit.
Unless that was the truth, in that case "wholly shiiit" nevermind.

If allen was running for office, this would of ended it like a sledge
hammer.

(end of spell check utility)
jon_banquer
2014-10-19 09:53:39 UTC
Permalink
Post by vinny
Post by jon_banquer
http://www.practicalmachinist.com/vb/cad-cam/using-construction-ball-292596/
http://www.practicalmachinist.com/vb/cad-cam/bobcad-cam-question-292665/
here's the reply from someone on practical machinist....
"I have no idea what you are asking"
That was messsssssed up to read. I bought bobcam with my own money so my
company would buy me something to use?
Why not tell the truth, i got a cracked version of bobcam to try to push my
company into buying something lagit.
Unless that was the truth, in that case "wholly shiiit" nevermind.
If allen was running for office, this would of ended it like a sledge
hammer.
(end of spell check utility)
How can you not know how to use a tooling ball?

Alan hates Israel, yet uses/raves about a CAM product from an Israeli firm.

I could go on but why bother? I'm honestly shaking my head in disbelief.
vinny
2014-10-19 10:12:13 UTC
Permalink
Post by jon_banquer
Alan hates Israel, yet uses/raves about a CAM product from an Israeli firm.
ahhh, i misssed that one.

Friggen jew lover allen!
Al Drake
2014-10-19 11:19:55 UTC
Permalink
Post by jon_banquer
Post by vinny
Post by jon_banquer
http://www.practicalmachinist.com/vb/cad-cam/using-construction-ball-292596/
http://www.practicalmachinist.com/vb/cad-cam/bobcad-cam-question-292665/
here's the reply from someone on practical machinist....
"I have no idea what you are asking"
That was messsssssed up to read. I bought bobcam with my own money so my
company would buy me something to use?
Why not tell the truth, i got a cracked version of bobcam to try to push my
company into buying something lagit.
Unless that was the truth, in that case "wholly shiiit" nevermind.
If allen was running for office, this would of ended it like a sledge
hammer.
(end of spell check utility)
How can you not know how to use a tooling ball?
Alan hates Israel, yet uses/raves about a CAM product from an Israeli firm.
I could go on but why bother? I'm honestly shaking my head in disbelief.
If you got anything from that post you would have learned that I said
it's been a long time since I used one and wanted to know how many
others have. When was the last time you did, if ever.

Once again you can't respond to anything without spreading your sick
lies.

I challenge you to post a link to anything I have ever posted that
shows I hate Jews. You won't because you can't because there are no
posts to back up your lies, now are there jon?

Now I have you jon. I have in this post beaten you to the curb and
made a fool out of you. It's up to you to back up what you say once and
for all.

We all know what you will do now jon. You'll do the usual snip and say
there is nothing to respond to. Which will further show you are a simple
minded self hating troll.

Good luck hater.


Whahahahahaa...........
Al Drake
2014-10-19 11:11:13 UTC
Permalink
Post by vinny
Post by jon_banquer
http://www.practicalmachinist.com/vb/cad-cam/using-construction-ball-292596/
http://www.practicalmachinist.com/vb/cad-cam/bobcad-cam-question-292665/
here's the reply from someone on practical machinist....
"I have no idea what you are asking"
That was messsssssed up to read. I bought bobcam with my own money so my
company would buy me something to use?
Why not tell the truth, i got a cracked version of bobcam to try to push
my company into buying something lagit.
Unless that was the truth, in that case "wholly shiiit" nevermind.
If allen was running for office, this would of ended it like a sledge
hammer.
(end of spell check utility)
Because you use cracked software doesn't mean I do. You can't handle the
truth vinny, which is you seem like a lowlife incapable of posting
anything but your childish rants. This post shows how you fall apart and
can't respond with anything sane, can you vinbozo?
vinny
2014-10-20 00:08:31 UTC
Permalink
Post by Al Drake
Because you use cracked software doesn't mean I do. You can't handle the
truth vinny, which is you seem like a lowlife incapable of posting
anything but your childish rants. This post shows how you fall apart and
can't respond with anything sane, can you vinbozo?
OK, im sorry, i was wrong.

You bought the software (it's 2000$) in hopes that your job would buy
something good.

You know what? better just be insulted and keep your mouth shut, everytime
you open it my eyes squint a little more.

Just shut off your computer, and walk away. In a month everyone will forget
the dumb shit you typed.

And by the way jew hater...jews make the best cam software on the planet.
But you stick with bobcrap.
jon_banquer
2014-10-20 00:21:33 UTC
Permalink
Post by vinny
Post by Al Drake
Because you use cracked software doesn't mean I do. You can't handle the
truth vinny, which is you seem like a lowlife incapable of posting
anything but your childish rants. This post shows how you fall apart and
can't respond with anything sane, can you vinbozo?
OK, im sorry, i was wrong.
You bought the software (it's 2000$) in hopes that your job would buy
something good.
You know what? better just be insulted and keep your mouth shut, everytime
you open it my eyes squint a little more.
Just shut off your computer, and walk away. In a month everyone will forget
the dumb shit you typed.
And by the way jew hater...jews make the best cam software on the planet.
But you stick with bobcrap.
Saying "jews make the best cam software on the planet" shows you a fucking moron with no clues about the CADCAM business.
Al Drake
2014-10-20 07:21:36 UTC
Permalink
Post by jon_banquer
Post by vinny
Post by Al Drake
Because you use cracked software doesn't mean I do. You can't handle the
truth vinny, which is you seem like a lowlife incapable of posting
anything but your childish rants. This post shows how you fall apart and
can't respond with anything sane, can you vinbozo?
OK, im sorry, i was wrong.
You bought the software (it's 2000$) in hopes that your job would buy
something good.
You know what? better just be insulted and keep your mouth shut, everytime
you open it my eyes squint a little more.
Just shut off your computer, and walk away. In a month everyone will forget
the dumb shit you typed.
And by the way jew hater...jews make the best cam software on the planet.
But you stick with bobcrap.
Saying "jews make the best cam software on the planet" shows you a fucking moron with no clues about the CADCAM business.
So jon, you're backing away from your lies? Once again I beat you to
the curb. That's why you waste so much energy hating me and try to
strike back with lies. Most likely the same lies you tell yourself.
"They all hate me because I'm jewish." Is this what you mommy told you
since as long as you can remember?

You're a sick one jon. You can't keep from attacking everyone can you?
Al Drake
2014-10-20 07:16:14 UTC
Permalink
Post by vinny
Post by Al Drake
Because you use cracked software doesn't mean I do. You can't handle
the truth vinny, which is you seem like a lowlife incapable of posting
anything but your childish rants. This post shows how you fall apart
and can't respond with anything sane, can you vinbozo?
OK, im sorry, i was wrong.
You bought the software (it's 2000$) in hopes that your job would buy
something good.
You know what? better just be insulted and keep your mouth shut,
everytime you open it my eyes squint a little more.
Just shut off your computer, and walk away. In a month everyone will
forget the dumb shit you typed.
And by the way jew hater...jews make the best cam software on the
planet. But you stick with bobcrap.
Once again you show your stupidity and ignorance. The cost was one
third of that amount. You should be taking your own advice vinbozo.No
one pays attention to a little man like you anyway.

Why not spend some time on PM and and actually learn something?
Nooo... You rather be here where you and jon have the fantasy that
someone actually reads what you post.
jon_banquer
2014-10-20 07:24:30 UTC
Permalink
Post by Al Drake
Why not spend some time on PM and and actually learn something?
That's some funny shit right there.

All the serious CADCAM content long ago moved to LinkedIn groups.
Al Drake
2014-10-20 20:20:08 UTC
Permalink
Post by jon_banquer
Post by Al Drake
Why not spend some time on PM and and actually learn something?
That's some funny shit right there.
All the serious CADCAM content long ago moved to LinkedIn groups.
Who cares? By the way where's your proof about your claims. You have
nothing do you? You don't seem to have anything going for you do you?

No one was expecting much from a fool that get's arrested for domestic
violence and wife beating. That I did prove. You'll always be a buffoon jon.
jon_banquer
2014-10-20 21:42:44 UTC
Permalink
Post by Al Drake
Post by jon_banquer
Post by Al Drake
Why not spend some time on PM and and actually learn something?
That's some funny shit right there.
All the serious CADCAM content long ago moved to LinkedIn groups.
Who cares? By the way where's your proof about your claims. You have
nothing do you? You don't seem to have anything going for you do you?
No one was expecting much from a fool that get's arrested for domestic
violence and wife beating. That I did prove. You'll always be a buffoon jon.
An arrest without a conviction means absolutely nothing except to an idiot like you. You can't show any convictions. Why is that? You have been asked this question perhaps a 100 times and you still have no answer.

Here is a recent arrest for you. Why don't you tell us about how violent and dangerous this person is:

http://time.com/3502832/ferguson-protests-arrests/

Perhaps you should be more worried about why you still need help using a tooling ball rather than continuing to make a total fool out of yourself.
vinny
2014-10-20 22:45:29 UTC
Permalink
Post by jon_banquer
Post by Al Drake
No one was expecting much from a fool that get's arrested for domestic
violence and wife beating. That I did prove. You'll always be a buffoon jon.
An arrest without a conviction means absolutely nothing except to an idiot
like you. You can't show any convictions. Why is that? You have been asked
this question perhaps a 100 times and you still have no answer.
If it was wife beating it would be domestic battery. (felony)
What prolly happened is an argument that led to pushing in the front yard,
cops came, domestic violence...take the anger management class and pay the
money and record is adjudicated.

My advice jb is ignore it. You can literally get domestic violence by not
letting your wife use the checking acct, or taking a drunk wifes keys,
etc...
Without the facts, domestic violence is a joke. Its a rediculous law that
says "arrest everyone at the scene you can". it was designed to stop an
epidemic of battery by arresting everyone involved.
The best part is when a woman has the cops come over for domestic violence
and they both go to jail.

its like careless driving, could mean anything, as opposed to wreckless
driving (felony).

but your still a dick lol
Al Drake
2014-10-21 07:27:27 UTC
Permalink
Post by jon_banquer
Post by Al Drake
Post by jon_banquer
Post by Al Drake
Why not spend some time on PM and and actually learn something?
That's some funny shit right there.
All the serious CADCAM content long ago moved to LinkedIn groups.
Who cares? By the way where's your proof about your claims. You have
nothing do you? You don't seem to have anything going for you do you?
No one was expecting much from a fool that get's arrested for domestic
violence and wife beating. That I did prove. You'll always be a buffoon jon.
An arrest without a conviction means absolutely nothing except to an idiot like you. You can't show any convictions. Why is that? You have been asked this question perhaps a 100 times and you still have no answer.
http://time.com/3502832/ferguson-protests-arrests/
Perhaps you should be more worried about why you still need help using a tooling ball rather than continuing to make a total fool out of yourself.
You were arrested and have a mugshot and am arrest record and no wife
to beat around. I believe her side of the story while you want to a
distraction by pointing to others. This isn't about anyone but you and
your lies that you still can't back up so now you run after having been
beaten to the curb yet again. You must be one miserable lowlife to live
the way you do with all that hate built up inside.

You're a loser jon. You most likely always have been and it clear to
everyone you always will be.

It must really suck being jon banquer. Did they beat on you in school
like I'm beating on you now?
jon_banquer
2014-10-21 07:43:25 UTC
Permalink
On Tuesday, October 21, 2014 12:27:27 AM UTC-7, Al Drake continued to evade the facts and instead offered up his usual lies and worthless gossip:

<Bullshit and lies snipped>

Nothing to respond to.
Al Drake
2014-10-21 20:04:25 UTC
Permalink
Post by jon_banquer
<Bullshit and lies snipped>
Nothing to respond to.
Once again the coward known as jon banquer runs and snips. We weren't
expecting any more.

Still unable to back up your lies I see. Run, run run jon boy. That's
all you can do at this point. Again I've beaten you to the curb.
jon_banquer
2014-10-21 20:13:32 UTC
Permalink
On Tuesday, October 21, 2014 1:04:25 PM UTC-7, Al Drake failed:

<Bullshit/lies snipped>

Nothing to respond to.

vinny
2014-10-20 22:46:26 UTC
Permalink
Post by Al Drake
Post by Al Drake
Why not spend some time on PM and and actually learn something?
Who cares? By the way where's your proof about your claims. You have
nothing do you? You don't seem to have anything going for you do you?
Didnt you read your own posts in PM?
Try reading them out loud to your dog, see the reaction.
Al Drake
2014-10-21 07:31:13 UTC
Permalink
Post by vinny
Post by Al Drake
Post by Al Drake
Why not spend some time on PM and and actually learn something?
Who cares? By the way where's your proof about your claims. You have
nothing do you? You don't seem to have anything going for you do you?
Didnt you read your own posts in PM?
Try reading them out loud to your dog, see the reaction.
Obviously you don't read what you post here. Is reading to your dog
something you recommend and works for you?
vinny
2014-10-20 10:17:11 UTC
Permalink
Post by vinny
You bought the software (it's 2000$) in hopes that your job would buy
something good.
Once again you show your stupidity and ignorance. The cost was one third
of that amount. You should be taking your own advice vinbozo.No one pays
attention to a little man like you anyway.
I just trolled you into telling us how much you spent on the software.

650.00$.

You r one dedicated employee willing to spend 700bux to show the shop how
ass backwards they are.

By the way idiot, stick with bobcam/bobwire. It's pretty nice stuff for 90%
of a shops needs.
Besides, its very intuitive, good for those just starting out for the first
time.

And itll run on your dell laptop. lol
Al Drake
2014-10-20 20:16:24 UTC
Permalink
Post by vinny
Post by Al Drake
Post by vinny
You bought the software (it's 2000$) in hopes that your job would buy
something good.
Once again you show your stupidity and ignorance. The cost was one
third of that amount. You should be taking your own advice vinbozo.No
one pays attention to a little man like you anyway.
I just trolled you into telling us how much you spent on the software.
650.00$.
You r one dedicated employee willing to spend 700bux to show the shop
how ass backwards they are.
By the way idiot, stick with bobcam/bobwire. It's pretty nice stuff for
90% of a shops needs.
Besides, its very intuitive, good for those just starting out for the
first time.
And itll run on your dell laptop. lol
You are a troll for sure but you are still off about how much you
think I paid. You are clueless about most things but we all know that.

I don't have a Dell laptop either. It seems like you're the one that's
stupid. But then again we all knew that too. You have no idea what I do,
where I work or what my company is involved in. It seems you enjoy
making an ass out of yourself vinbozo.

Go smoke some more crack little one.
jon_banquer
2014-10-20 21:46:04 UTC
Permalink
Post by Al Drake
You are a troll for sure but you are still off about how much you
think I paid. You are clueless about most things but we all know that.
Who is this "we" you speak of? You can only speak for yourself, Fucktard.
Al Drake
2014-10-21 07:36:35 UTC
Permalink
Post by jon_banquer
Post by Al Drake
You are a troll for sure but you are still off about how much you
think I paid. You are clueless about most things but we all know that.
Who is this "we" you speak of? You can only speak for yourself, Fucktard.
We love it when you get all pissed off. This means I am beating you to
the curb again. We are all the ones that you think are interested in
anything you post.

Where is your to back up your claims. Again you run. We were expecting
nothing more from you jon. We all know you.
vinny
2014-10-20 22:52:18 UTC
Permalink
Post by Al Drake
You are a troll for sure
And your point is?


but you are still off about how much you
Post by Al Drake
think I paid.
You paid more than a dollar? So your an idiot.
Post by Al Drake
I don't have a Dell laptop either. It seems like you're the one that's
stupid.
your stupid BWAAAAAAAAAAAAAHAHAHAH!!!! OH FUK!!!!!

Next time quote pee wee herman "i know you are but what am i"




But then again we all knew that too. You have no idea what I do,

You sure as fuk dont program and seem pretty damn computer illiterate asking
how to install a plugin.
Post by Al Drake
where I work or what my company is involved in. It seems you enjoy making
an ass out of yourself vinbozo.
Go smoke some more crack little one.
I'll pass on the crack, but I will take another toke.
Loading...