Discussion:
Okuma OSP5020M M-code for coolant thru spindle
(too old to reply)
Tero Kaarlela
2006-09-25 07:03:34 UTC
Permalink
Hi,

What are M-codes on Okuma 5020M for coolant through spindle on/off? Or
in our case coolant through tooling(oil hole)



Tero Kaarlela
Eka-Sorvaus OY
PrecisionMachinisT
2006-09-25 07:08:37 UTC
Permalink
Post by Tero Kaarlela
Hi,
What are M-codes on Okuma 5020M for coolant through spindle on/off? Or
in our case coolant through tooling(oil hole)
Not sure about okuma but suggest inna pinch one should at least try using
m50 err m51 m52.

--

SVL
Tero Kaarlela
2006-09-25 07:47:08 UTC
Permalink
Thanks these work.


Tero Kaarlela
Eka-Sorvaus Oy
Nivala, Finland
Post by PrecisionMachinisT
Post by Tero Kaarlela
Hi,
What are M-codes on Okuma 5020M for coolant through spindle on/off? Or
in our case coolant through tooling(oil hole)
Not sure about okuma but suggest inna pinch one should at least try using
m50 err m51 m52.
--
SVL
PrecisionMachinisT
2006-09-25 15:43:51 UTC
Permalink
Post by Tero Kaarlela
Thanks these work.
I just got lucky was all, but you're still perfectly welcome...
Post by Tero Kaarlela
Tero Kaarlela
Eka-Sorvaus Oy
Nivala, Finland
Post by PrecisionMachinisT
Post by Tero Kaarlela
Hi,
What are M-codes on Okuma 5020M for coolant through spindle on/off? Or
in our case coolant through tooling(oil hole)
Not sure about okuma but suggest inna pinch one should at least try using
m50 err m51 m52.
--

SVL

--Going out to buy a lottery ticket now....
Cliff
2006-09-25 16:41:43 UTC
Permalink
On Mon, 25 Sep 2006 08:43:51 -0700, "PrecisionMachinisT"
Post by PrecisionMachinisT
--Going out to buy a lottery ticket now....
LOL ...
--
Cliff
Why
2006-09-25 17:43:57 UTC
Permalink
SVL

--Going out to buy a lottery ticket now....

Why not, better odds than running a machine shop <Grin>.

Loading...