Discussion:
Parts Counter
(too old to reply)
Glen
2016-03-31 02:18:02 UTC
Permalink
Raw Message
Trying to program a parts counter on a M-32 contoller in an EIA/ISO program. I
am having no luck. Anybody got a clue.

--
posted from
http://www.polytechforum.com/cnc/parts-counter-70623-.htm
using PolyTechForum's Web, RSS and Social Media Interface t
alt.machines.cnc and other engineering groups
Steve Walker
2016-04-03 03:37:10 UTC
Permalink
Raw Message
Post by Glen
Trying to program a parts counter on a M-32 contoller in an EIA/ISO program. I
am having no luck. Anybody got a clue.
Pretty sure this is what you need:

System variable #3901

(put this at the end of the program)

#3901=#3901+1
Glen
2016-04-03 04:18:02 UTC
Permalink
Raw Message
replying to Steve Walker, Glen wrote:
I will give it a try on Monday. Thank you.

--
posted from
http://www.polytechforum.com/cnc/parts-counter-70623-.htm
using PolyTechForum's Web, RSS and Social Media Interface t
alt.machines.cnc and other engineering groups
DanP
2016-04-04 22:20:24 UTC
Permalink
Raw Message
If you know what you are doing and how to handle it put all stuff in a sub and have it called from within the M06 tool change programming, O9xxx. Add the call just before M99 so you will not get stuck with a failed tool change.

So you can catch whatever you are after running any part program without having to add anything.


DanP

Loading...