Discussion:
westinghouse "producer 2" CNC help
(too old to reply)
Robin Szemeti
2004-12-20 12:37:11 UTC
Permalink
Hi

We have a punch with a Westinghouse "producer2" CNC ... and after a move
to a new location its a bit broken. We cant get the executive program to
load.

Normally, we initiate the load sequence and get on the display "0000" in
the address register and "0FFF" in the SWREG, dump the executive into the
serial port and it all gets loaded into memory. ... but we're getting "####"
in the address register and "FFAC" in the SWREG which looks like some
sort of checksum error to me, as a result we never even get to the
'loading the executive' stag, ... im guessing the
bootstrap loader is in some way hosed, or the target memory. Either way,
we can't load the executive.

Anybody got any experience of these machines? Or better still anyone in
the UK got a PULSA8 punch they want to come and play board-swap with to help us
find the dodgy board? Or a Westinghouse Producer 2 CNC boardset they no
longer need ...??

Failing that ... its going to be a retrofit. Looks like theres a milliona
and one IO lines though ho hum, thats going to be not fun to sort out. oh
no.
m***@ems-fife.co.uk
2004-12-20 14:01:50 UTC
Permalink
Post by Robin Szemeti
Hi
We have a punch with a Westinghouse "producer2" CNC ... and after a move
to a new location its a bit broken. We cant get the executive
program to
Post by Robin Szemeti
load.
Normally, we initiate the load sequence and get on the display "0000" in
the address register and "0FFF" in the SWREG, dump the executive into the
serial port and it all gets loaded into memory. ... but we're
getting "####"
Post by Robin Szemeti
in the address register and "FFAC" in the SWREG which looks like some
sort of checksum error to me, as a result we never even get to the
'loading the executive' stag, ... im guessing the
bootstrap loader is in some way hosed, or the target memory. Either way,
we can't load the executive.
Anybody got any experience of these machines? Or better still anyone in
the UK got a PULSA8 punch they want to come and play board-swap with to help us
find the dodgy board? Or a Westinghouse Producer 2 CNC boardset they no
longer need ...??
Failing that ... its going to be a retrofit. Looks like theres a milliona
and one IO lines though ho hum, thats going to be not fun to sort out. oh
no.
There`s a dealer up the north east who has a Pulsa with westinghouse
control.I doubt he would let you swap boards,but I don`t suppose he`s
wanting much for the machine.You will pick up another machine without
auto index for under £5000.
regards,Mark.
hamei
2004-12-21 01:51:42 UTC
Permalink
Post by Robin Szemeti
Hi
We have a punch with a Westinghouse "producer2" CNC ... and after a move
to a new location its a bit broken. We cant get the executive program to
load.
Anybody got any experience of these machines? Or better still anyone in
the UK got a PULSA8 punch they want to come and play board-swap with to help us
find the dodgy board? Or a Westinghouse Producer 2 CNC boardset they no
longer need ...??
Failing that ... its going to be a retrofit. Looks like theres a milliona
and one IO lines though ho hum, thats going to be not fun to sort out. oh
no.
I love that control .. there's a complete one here I could get you
for a good price (probably $1500 ?) but shipping might be a problem ?
Nah, we ship stuff everywhere. Still, it's complete, has some of the
nicer options and was running in good shape when parked a while ago.
In fact, you could have a 2560 along with it (many boards are the
same.)

Loading...